Basic Info.
After-sales Service
Machine Whole Usage Period
Warranty
One Year Warranty
Automatic Grade
Automatic
Certification
GS, CE, RoHS, ISO 9001
Movement Method
Linear Control
Control Method
Closed-Loop Control
Tool Magazine Number
24PCS
Process Usage
Metal-Cutting CNC Machine Tools
Positioning Accuracy (mm)
0.008
Table Travel(X*Y*Z)
850X540X520mm
Spindle Motor Power(Kw)
5.5/11
Trademark
GooDa Manufacturer
Transport Package
Steel Box
Specification
2200x2450x2600mm
Product Description
Product Description
GDVL-850 plus is a fixed-column vertical machining center machine tool. It has mechatronics design and stylish look. It cuts precisely, after the workpiece is clamped once, the machine tool can automatically and continuously complete the processing of multiple processes such as milling, drilling, boring, expanding, reaming, countersinking, and tapping.
On the basis of inheriting the advantages of strong rigidity, symmetrical structure and strong stability of the traditional vertical CNC milling machine, this machine tool introduces the international advanced dynamic rigid design concept and optimizes the design of moving parts.
The machine tool has the characteristics of large torque, fast response characteristics, etc., which is suitable for the needs of variousmachining fields such as automobiles, molds, aerospace, military, and hardware.
Product Features
1. Linear slide rails are used for three-axis movement. The three-axis rapid movement can reach 36m/min, and the heaviest load is 550Kg, ensuring accurate positioning.
2. The main shaft and the motor belt use 1:1 connection design. The main motor is a low inertia motor, and its maximum speed is 10,000rpm.
The main shaft and the motor are directly connected. There is no belt or gear transmission noise, backlash, or vibration. The motor shaft outputs the speed directly, the maximum speed is 12000rpm, and high-quality tapping effects can be obtained. The main motor is a low-inertia motor, there is no time lag during high-speed tapping and commutation to avoid pulling teeth.
3. The machine bed, workbench, column, beam, saddle, and headstock are made of resin sand molded HT300 high-strength inoculated cast iron. After secondary annealing, the internal stress caused by casting stress and rough machining is completely eliminated to ensure high rigidity and high structure. Stable and qualitative, ensure quality permanently.
4. The castings are calculated and analyzed by computer based on finite element analysis. The reasonable structure strength and the matching of reinforcing ribs provide high mechanical rigidity.
Detailed Photos
Specification
| Model:GDVL-850PLUS | Unit | Specification |
| Process Range | Three axis travel | mm | 850/540/520 |
| Spindle center to column guide | mm | 550 |
| Spindle end to worktable | mm | 125~645 |
| Worktable | Table Size | mm | 1000×500 |
| MAX Loading weight | kg | 550 |
| T-Slot (Number/Width/Gap) | - | 5×18×100 |
| Spindle | Spindle Speed | rpm | 10000 |
| Spindle Taper | - | BT40 |
| Spindle Motor | KW | 5.5/11 |
Speed
| Rapid Moving (X/Y/Z) | m/min | 48/48/48 |
| Rapid Feed (X/Y/Z) | m/min | 10/10/10 |
| Tool Magazine | Tool Magazine Number | pcs | 24 |
| Tool MAX Diameter/length/weight | - | Æ75mm/300mm/7kg |
| Tool MAX Diameter (Full/Empty) | mm | 75/150 |
| Tool selection method | - | any/sequence |
| Time (tool-tool) | S | 1.8 |
| Machine Accuracy | Positioning | mm | 0.008 |
| Re-Positioning | mm | 0.005 |
| Others | Air source | L/min | 280 |
| Air pressure | Bar | 6~8 |
| Total electrical capacity | KVA | 20 |
| Water tank capacity | L | 400 |
| Machine size | mm | 2400×2650×2600 |
| Machine weight | kg | 4900 |
System
| FANUC SYSTEM OR Mitsubishi controller | - | Optional |
Installing condition
1. Temperature
Operating temperature: Room temperature 17±25ºC
When stored/moving: -30ºC~50ºC
MAX range: 10ºC/hour
2. Humidity
Constant: 75%below (unfrozen)
short period: 95% below (unfrozen )
3. Altitude below 1000m
4. Installation site conditions.
a. No external vibration.
b. No corrosive gases.
c. No direct exposure to the machine.
d. No direct with out-side wind or cold/hot air
e. No heating source nearby
f. Avoid from dust
g. Avoid from water leakage and flooding
h. Avoid from electrical noise
5. Power:3 phases380V±10%
Company Profile
Certifications
According to following standards:
* TUV ISO 9001 certificate
* TUV certificate
* SGS certificate
* CE certificate
* More than 39 patents certificate* National High-tech Enterprises certificate Productivity Benifits
The benefits of GOODA maintenance contract (After sales 3 years):
- Basic requirement in a certified QS system
- Guarantee for the accuracy of the measuring and test results
- Calibration, maintenance and, if necessary, repair with just one visit
- Fixed prices with a clear breakdown of costs
- Preventive maintenance helps you avoid expensive faults and ensures a high level of quality that lasts
The maintenance contract includes:
- Travelling time and expenses for our technician
- Maintenance and calibration work
- Small items required for carrying out the specified maintenance work
- Calibration with a corresponding maintenance and test report, allowing the results to be used to demonstrate compliance with national standards
Address:
Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}