Product Description
1. Description of basic machine functions
On the basis of inheriting the advantages of strong rigidity, symmetrical structure and strong stability of the traditional vertical CNC milling machine, this machine tool introduces the international advanced dynamic rigid design concept and optimizes the design of moving parts. The machine tool has the characteristics of large torque, fast response characteristics, etc., which is suitable for the needs of various machining fields such as automobiles, molds, aerospace, , and hardware.
Linear slide rails are used for three-axis movement. The three-axis rapid movement can reach 36m/min, and the heaviest load is 650Kg, ensuring accurate positioning.
The main shaft and the motor belt use 1:1 connection design. The main motor is a low inertia motor, and its maximum speed is 10,000rpm.
The main shaft and the motor are directly connected. There is no belt or gear transmission noise, backlash, or vibration. The motor shaft outputs the speed directly, the maximum speed is 12000rpm, and high-quality tapping effects can be obtained. The main motor is a low-inertia motor, there is no time lag during high-speed tapping and commutation to avoid pulling teeth.
The machine bed, workbench, column, beam, saddle, and headstock are made of resin sand molded HT300 high-strength inoculated cast iron. After secondary annealing, the internal stress caused by casting stress and rough machining is completely eliminated to ensure high rigidity and high structure. Stable and qualitative, ensure quality permanently.
The castings are calculated and analyzed by computer based on finite element analysis. The reasonable structure strength and the matching of reinforcing ribs provide high mechanical rigidity.
2. The main parts of the machine and its structure.
(1) Base
large-span base, the guide rail is 1.2 times higher than peering companies, effectively disperses the gravity and processing capacity; the saddle has a short overhang, which greatly improves the dynamic accuracy.
(2) Column
We use upside-down "Y" shape column which is more stable and rigid than "I" shape column. It can eliminate to the greatest extent the problem of the laterally stressed column tilting left and right.
The design of sheet metal protection and chip removal system is very mature on the upside-down "Y" shape column. and the water leakage problem of sheet metal installation is avoided from the mechanical structure.
(3)Spindle box
The contact ratio of the spindle box to the column adopts the best contact ratio design, and it is matched with the imported spindle from Taiwan to achieve the high rigidity of the headstock of the huge machine tool. It can ensure the rigidity requirements of drilling, milling, tapping, boring and other processes.
(4) High precision, high performance, high stability precision spindle (Optional)
The belt driven spindle has high precision and high rigidity, which is the best choice for low speed and heavy cutting occasions.
The screw driven spindle also has the characteristics of high precision, high rigidity, and high speed. It is the best choice for high speed, precision machining, and surface finish.
The use of a low-inertia spindle motor has short acceleration time, high motor efficiency, fast acceleration and deceleration, reducing backlash problems, and improving tapping speed and quality.
(5) Ball screw and linear slide
In order to ensure the rigidity and durability of the machine, the ball screws and linear slides used are more than 1.28 times larger than peering companies to ensure the maximum load capacity and prolong the service life of the machine.
(6)Cooling system
The machine is equipped with a cooling system, the perfect combination of a large-flow water pump and number of nozzles, which effectively solves the processing drawbacks of cutting tools due to overheating Workpiece and workpiece deformation due to heat during processing.
(7)The bed rail (X/Y axis) of the machine tool adopts a telescopic shield, and the column guide adopts an organ and armored shield to maximize the protection of the guide rail and screw from the corrosion and wear of cutting fluid and processing waste; the external protection of the machine tool is fully enclosed To prevent iron filings and coolant from splashing, so that operators can work in a safe and comfortable environment.
(8)Machine appearance
The design of the outer sheet metal is minimalistic with futuristic look and feel. We deigned a big and high door for quick access and loading workpiece. It is big enough even for installing the fourth-axis.
Giant water tank, large inclined angle chip flute, and rear waste removal design ensure smooth waste ejection, prolong the service life of the Y rear guard, and the cooling water will not be interrupted until the maximum amount of cooling water is opened, and it will not cause water leakage in the machine tool.
(9)Lubrication system
Grease lubrication for three-axes
Automatic thin oil lubrication are used on the ball screw and guide rail.
The X,Y, Z coordinate guide rails have automatically controlled lubrication points, and the lubricating oil will lubricate the guide rails after being shunted.
The pressure detection method is adopted to ensure that the preset pressure can be reached every time the oil is pumped, otherwise the system will prompt an alarm
(10)Electrical parts
In addition to mechanical design, GOODA also pay great attention to electrical design. The CNC system uses a unique optical fiber communication method, which greatly increases the speed of data communication, and greatly reduces the number of wiring, making the electrical cabinet very tidy.
(11) Operation System (all specs should follow the real contract)
Operation system features:
We have been using large-board structure for the beginning, but modular structure has been adopted in new products. We use dedicated LSI to improve integration, reliability, reduce volume and reduce costs.
Wide range of product applications. Each CNC device can be equipped with a variety of upper control software, suitable for a variety of machine tools.
Continuously adopt new processes and technologies. Such as surface mount technology SMT, multilayer printed circuit boards, optical fiber cables, etc.
The volume of the CNC device is reduced, and the panel-mounted, built-in PMC programmable machine tool controller is adopted
We continuously add new functions in interpolation, acceleration and deceleration, compensation, automatic programming, graphic display, communication, control and diagnosis
Interpolation function: In addition to linear, arc, and spiral interpolation, there are imaginary axis interpolation, extreme coordinate interpolation, cone interpolation, exponential function interpolation, spline interpolation, etc.
Automatic acceleration and deceleration function of cutting feed: In addition to linear acceleration and deceleration after interpolation, it also has acceleration and deceleration before interpolation.
Compensation function: In addition to pitch error compensation and screw backlash compensation, there are slope compensation linearity compensation and new tool compensation functions.
Fault diagnosis function: using artificial intelligence, the system has reasoning software, and finding the cause of the fault based on the knowledge base.
The full name of handwheel is manual pulse generator, also known as photoelectric encoder. Novel shape, easy to move, anti-interference, strong load capacity; full plastic shell, high insulation strength, anti-oil seal design; with X1, X10, X100 three-gear magnification, can realize 4-axis magnification switching; with enable switch, emergency Optional stop switch, human design, easy to operate.
Product Parameters
| Model: GDVL-1066NC | Unit | Specification |
| Process Range | (X/Y/Z)Three axis travel distance | mm | 1000/600/600 |
| Distance from spindle center line to column guide surface | mm | 650 |
| Distance from spindle nose to work bench surface | mm | 125~725 |
| Work Bench | Work bench size | mm | 1100×550 |
| MAX Load | kg | 650 |
| T-slot | | 5×18×100 |
| Spindle | Spindle Speed | rpm | 10000 |
| Spindle Taper | | BT40 |
| Spindle Motor Power | kW | 7.5/11 |
Speed
| Rapid Moving (X/Y/Z) | m/min | 36/36/36 |
| Rapid Feeding Speed | m/min | 10/10/10 |
| Tool Magazine | Tool Magazine Number | | 24 |
| Tool MAX Diameter/length/weight | | Æ75mm/300mm/7kg |
| Tool MAX Diameter (Full/Empty) | mm | 75/150 |
| Tool selection method | | /Any/sequence |
| Tool Changing time (from one tool to another) | S | 1.8 |
| Machine Accuracy | (X/Y/Z)Positioning Accuracy | mm | 0.008 |
| (X/Y/Z)Re-Positioning Accuracy | mm | 0.005 |
| Others | Air source/Air pressure | | 280L/min 6~8bar |
| Total electrical capacity of the machine | KVA | 20 |
| Water tank capacity | L | 400 |
| Machine size(X×Y×Z) | mm | 2990×2900×2750 |
| Machine weight | kg | 5500 |
Configuration
| No | Name | Quantity | Note |
| 1 | Mitsubishi M80B CNC system | 1 | |
| 2 | Handheld operating unit | 1 | |
| 3 | Disc Tool Magazine | 1 | 24 units |
| 4 | Automatic lubrication system | 1 | |
| 5 | LED Warning Light | 1 | |
| 6 | Spindle blowing device | 1 | |
| 7 | Air curtain protection | 1 | |
| 8 | Flashlight | 1 | |
| 9 | Attached accessories | 1 | |
| 10 | Attached Technical agreement | 1 | |
Attachment list
| NO. | Attached items |
Specs and models |
Quantity |
| 1 | Foundation bolt group | M36*2P*115mm | 1 |
| 2 | Hand pulse generator | / | 1 |
| 3 | Communication Cable | / | 1 |
| 4 | Air blower | / | 1 |
| 5 | Fixing kit | | 1 |
General requirements for the Machine
1.Required environment
Keep the temperature at a balanced level, especially during precise cutting.
Working temperature10ºC~40ºC, when 20ºC, humidity should be around: 40~75%
To keep the static accuracy of the machine within the specified range, the best temperature is within 15ºC~25ºC, and the temperature difference should not exceed ±2ºC/24h.
2.Power supply voltage
3-phase, 380V, voltage fluctuation within ±10%, power supply frequency: 50HZ.
If the voltage in the area is unstable, the machine should be equipped with a regulated power supply to ensure the normal operation of the machine tool.
3.The machine should have a reliable grounding
The grounding wire should be copper wire, the wire diameter should not be less than 10mm², and the grounding resistance should be less than 4 ohms.
In order to ensure the normal working performance of the machine, if the compressed air of the air source does not meet the requirements, a set of air source purification devices (dehumidification, degreasing, filtration) should be in placed before the machine's air intake.
Keep the machine away from direct sunlight, intense vibration, high heat, high-frequency generators and electric welding machines, etc., to avoid machine production failure or loss of machine tool accuracy. Company Profile
Certifications
According to following standards:
* TUV ISO 9001 certificate
* TUV certificate
* SGS certificate
* CE certificate
* More than 39 patents certificate* National High-tech Enterprises certificate Productivity Benifits
The benefits of GOODA maintenance contract (After sales 3 years):
- Basic requirement in a certified QS system
- Guarantee for the accuracy of the measuring and test results
- Calibration, maintenance and, if necessary, repair with just one visit
- Fixed prices with a clear breakdown of costs
- Preventive maintenance helps you avoid expensive faults and ensures a high level of quality that lasts
The maintenance contract includes:
- Travelling time and expenses for our technician
- Maintenance and calibration work
- Small items required for carrying out the specified maintenance work
- Calibration with a corresponding maintenance and test report, allowing the results to be used to demonstrate compliance with national standards
