Basic Info.
After-sales Service
3 Years Maintainance
Warranty
One Years Maintainance
Process Usage
Metal-Cutting CNC Machine Tools
Numerical Control
CNC/MNC
Processing Precision
0.01~0.02(mm)
Performance Classification
High-End CNC Machine Tools
Certification
GS, CE, RoHS, ISO 9001
Tool Magazine Number
24PCS
Transport Package
Wooden /Steel Box
Specification
2200x2450x2600mm
Product Description
CNC Vertical Machining Center GDVL-650NC
GDVL-650NC is a fixed-column vertical machining center machine tool, it has mechatronics design and stylish look. It cuts precisely, after the workpiece is clamped once, the machine tool can automatically and continuously complete the processing of multiple processes such as milling, drilling, boring, expanding, reaming, countersinking, and tapping.
On the basis of inheriting the advantages of strong rigidity, symmetrical structure and strong stability of the traditional vertical CNC milling machine, this machine tool introduces the international advanced dynamic rigid design concept and optimizes the design of moving parts. The machine tool has the characteristics of large torque,fast response characteristics, etc., which is suitable for the needs of variousmachining fields such as automobiles, molds, aerospace, military, and hardware.
Company Profile
Product Description
1. Linear slide rails are used for three-axis movement. The three-axis rapid movement can reach 36m/min, and the heaviest load is 550Kg, ensuring accurate positioning.
2. The main shaft and the motor belt use 1:1 connection design. The main motor is a low inertia motor, and its maximum speed is 10,000rpm.
The main shaft and the motor are directly connected. There is no belt or gear transmission noise, backlash, or vibration. The motor shaft outputs the speed directly, the maximum speed is 12000rpm, and high-quality tapping effects can be obtained. The main motor is a low-inertia motor, there is no time lag during high-speed tapping and commutation to avoid pulling teeth.
3. The machine bed, workbench, column, beam, saddle, and headstock are made of resin sand molded HT300 high-strength inoculated cast iron. After secondary annealing, the internal stress caused by casting stress and rough machining is completely eliminated to ensure high rigidity and high structure. Stable and qualitative, ensure quality permanently.
4. The castings are calculated and analyzed by computer based on finite element analysis. The reasonable structure strength and the matching of reinforcing ribs provide high mechanical rigidity.
Specification
Main specifications and technical parameters.
| Model:GDVL-650NC | Unit | Specification |
| Process Range | Three axis travel | mm | 600/500/520 |
| Spindle center to column guide | mm | 550 |
| Spindle end to worktable | mm | 125~645 |
| Worktable | Table Size | mm | 800×500 |
| MAX Loading weight | kg | 450 |
| T-Slot (Number/Width/Gap) | - | 5×18×100 |
| Spindle | Spindle Speed | rpm | 12000 |
| Spindle Taper | - | BT40 |
| Spindle Motor | KW | 5.5/7.5 |
Speed
| Rapid Moving (X/Y/Z) | mm/min | 48000/48000/48000 |
| Rapid Feed (X/Y/Z) | mm/min | 10000/10000/10000 |
| Tool Magazine | Tool Magazine Number | pcs | 24 |
| Tool MAX Diameter/length/weight | - | Æ75mm/300mm/7kg |
| Tool MAX Diameter (Full/Empty) | mm | 75/150 |
| Tool selection method | - | any/sequence |
| Time (tool-tool) | S | 1.8 |
| Machine Accuracy | Positioning | mm | 0.008 |
| Re-Positioning | mm | 0.005 |
| Others | Air source | L/min | 280 |
| Air pressure | Bar | 6~8 |
| Total electrical capacity | KVA | 20 |
| Water tank capacity | L | 270 |
| Machine size | mm | 2200×2450×2600 |
| Machine weight | kg | 4500 |
System
| FANUC SYSTEM OR Mitsubishi controller | - | Optional |
| No. | Motor standard spec |
| 1 | Main transmission system (including AC servo main motor, spindle, etc.) |
| 2 | X, Y, Z three-axis driven system (including AC variable frequency servo motor, coupling, ball screw, linear guide, etc.) |
| 3 | Main components (including base, worktable, column, saddle, spindle stock, etc.) |
| 4 | The numerical control system includes numerical control cabinet, power module, servo module, PLC, operating unit, display, movable hand pulse generator, heat exchanger, etc. |
| 6 | Pneumatic triple |
| 7 | Automatic lubrication system (including motor, pump, distributor, etc.) |
| 8 | Cutting fluid system (including motor, pump, chip flushing device and chip storage tray) |
| 9 | X, Y, Z axis rail protection |
| 10 | Work lights and warning lights |
| 11 | Attached technical file | 1.1 A user manual
2.1 A qualification certificate
3. Packing list |
| NO. | Attached items | Specs and models | Quantity |
| 1 | Foundation bolt group | M36*2P*115mm | 1 |
| 2 | Hand pulse generator | / | 1 |
| 3 | Communication Cable | / | 1 |
| 4 | Air blower | / | 1 |
| 5 | Fixing kit | | 1 |
Installing condition
a, Temperature
Operating temperature: Room temperature 17±25ºC
When stored/moving: -30ºC~50ºC
MAX range: 10ºC/hour
b,Humidity
Constant: 75%below (unfrozen)
short period: 95% below (unfrozen )
c, Altitude below 1000m
d, Installation site conditions.
1. No external vibration.
2. No corrosive gases.
3. No direct exposure to the machine.
4. No direct with out-side wind or cold/hot air
5. No heating source nearby
6. Avoid from dust
7.Avoid from water leakage and flooding
8. Avoid from electrical noise
e, Power:3 phases380V±10%
Detailed Photos
The main parts of the machine and its structure.
Base
large-span base, the guide rail is 1.2 times higher than peering companies, effectively disperses the gravity and processing capacity; the saddle has a short overhang, which greatly improves the dynamic accuracySpindle box
The contact ratio of the spindle box to the column adopts the best contact ratio design, and it is matched with the imported spindle from Taiwan to achieve the high rigidity of the headstock of the huge machine tool. It can ensure the rigidity requirements of drilling, milling, tapping, boring and other processesColumn
We use upside-down "Y" shape column which is more stable and rigid than "I" shape column. It can eliminate to the greatest extent the problem of the laterally stressed column tilting left and right.
The design of sheet metal protection and chip removal system is very mature on the upside-down "Y" shape column. and the water leakage problem of sheet metal installation is avoided from the mechanical structure.Transmission
The three-axis motor and high-precision ball screw adopt a direct drive method. The ball screw is pre-tensioned and installed to improve transmission rigidity and positioning accuracy. The three linear coordinate axes all use linear rolling guides, the machine tool has low vibration during high-speed feed and no crawling during low-speed feed. cooling system
The main shaft is equipped with a circulating oil cooling system to reduce the temperature rise caused by the high-speed rotation of the main shaft. The differential temperature mode is adopted to keep the main shaft temperature below about 2 degrees from the ambient temperature to ensure that there is no condensation on the surface of the main shaft, ensuring the life and accuracy of the main shaft.
(4) High precision, high performance, high stability precision spindle
Certifications
Packaging & Shipping
FAQ
FAQ:
1. What is your minimum order quantity and warranty?
MOQ is one set, and warranty is one year.
2.What CNC system do you use?
FANUC, SIEMENS, MISTSUBISHI etc. It depends on your choice.
3.When is the delivery time?
Conventional Machines,We will delivery then within 30-45 working days after received your
deposit,if some special machines will be some longer.we will give you the answer accordingly.
4. What is the package of the machines?
Packing: PE bag cover inside+ Plywood box + Steel beam frame.
5.How can I choose the most suitable machines ?
Please let us know your machining demand or machine size ,we can choose the best model
for you , or you can choose the exact model by yourself. You can also send us the products
drawing ,we will choose the most suitable machines for you .
6. What is your trade terms?
FOB, CFR,CIF or others terms are all acceptable.
7. What is your payment terms ?
Payment Terms : T/T 30% advance , 70% before shipment.
Maintenance & Service
The benefits of GOODA maintenance contract (After sales 3 years):
- Basic requirement in a certified QS system
- Guarantee for the accuracy of the measuring and test results
- Calibration, maintenance and, if necessary, repair with just one visit
- Fixed prices with a clear breakdown of costs
- Preventive maintenance helps you avoid expensive faults and ensures a high level of quality that lasts
The maintenance contract includes:
- Travelling time and expenses for our technician
- Maintenance and calibration work
- Small items required for carrying out the specified maintenance work
- Calibration with a corresponding maintenance and test report, allowing the results to be used to demonstrate compliance with national standards
Address:
Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}